Payment & Shipping Terms:
96m/min passenger and material hoist,
500m passenger and material hoist,
bevel heicial gearbox hoist lift construction
1.Elevator shaft lift is specially designed, which installed into the elevator shaft.It mainly consists of: cable guide, mast section, cage, driving board, lifting device, tie-in, safety device, safety control system, resistance box and an overload device.
2. elevator shaft hoist is with smaller cage (panel type/integrated type) and with 650*200mm mast sections,making it more compact and reducing the space requirements.
3.It has double layer roof so the electrical box & driving mechansims can be protected from the falling debrises, also the double layer provides a platform for the technicians during the installation or dismantling.
4.The hoist's cart can be designed as panel type, so the cage can be put into the elevator shaft and assembled inside, no need to widen the shaft's openning.
|Model||SC200 ELEVATOR SHAFT HOIST|
|INSTALLATION HEIGHT (m)||Max. 500m|
(ASSEMBLED TYPE, FINAL SIZE IS SUBJECT TO ACTUAL DRAWING)
2×11 HELICAL BEVEL TYPE GEARBOOX
|MAST SECTION(mm)||650×200×1508 (HDG, SIGNLE RACK)|
|MAST QUANTITY||THICKNESS: 4.5mm 26PCS|
|TIE-IN||TYPE: V (SPECIAL) / TYPE VI|
|CABLE||WITH CABLE OR BUSBAR|
Elevator Shaft Hoist Instlled in Bankok, Thailand
Contact Person: Zhang Chen