As a Construction Hoists Supplier, let us explain the maintenance of tower crane parts.
1. The brake parts shall be retired in one of the following cases:
(2) The friction pad wear of the brake pad is up to 50% of the thickness of the raw material;
(3) The surface wear of the brake wheel reaches 5mm ~ 2mm;
(4) The plastic deformation occurs in the spring;
(5) The idle travel of the lever system exceeds approximately 10% of its rated stroke.
Mobile Luffing Tower Crane
2. The hook of Mobile Luffing Tower Crane is not allowed to be repaired. It should be scrapped if one of the following conditions is true:
(1) Observing cracks and breaks on the surface with a 20-fold magnifying glass;
(2) Hazardous sections such as hook tails and threaded parts and hooks have permanent deformation;
(3) The wear of the lanyard section exceeds 10% of the original height;
(4) the mandrel wear amount exceeds 5% of its diameter;
(5) The opening degree is increased by 15% compared with the original size. When the crane is overloaded, it will cause the rope to fall.
Our company specializes in Construction Machinery Topless Tower Crane. If you are interested in our products, please feel free to contact us, we will be happy to help you.