Product Details:
Payment & Shipping Terms:
|
High Light: | 8000Lm Solar Flame Light,12800LM Solar Flame Light,Solar Flame Light 80W |
---|
solar flame light/LED/4800LM/8000LM/12800LM/30W/50W/80W Ideal for local streets lighting, parking lot lighting
I.Gerenal Introduction
1.Adopt Ceramic heat dissipation technology, the life span can reach 50,000hrs, which is 5 times that of HPS.
2.All in one design, solar panel, battery, controller and led lamps integrated into one unit, no extra wiring, easy installation.
3.High efficacy LED lamps.
4.Maintenance-free lithium battery, longer lifetime.
5.Intelligent battery management, prolong battery lifetime.
6.Auto dusk to dawn, 5-phased time control, plus motion detection control, typically 25% stand-by and auto switch to full brightness in case of motion detected.
II.Specifications
Model No. | SE-OTY-30W | SE-OTY-50W | SE-OTY-80W |
Solar Panel Power | 5V/50W | 5V/90W | 5V/150W |
Solar Panel Lifespan | 25 years | ||
Solar Panel | 100 wp | ||
LiFePO4 Battery | 3.2V/60Ah | 3.2V/120Ah | 3.2V/240Ah |
Battery Lifespan | 8-12 years | ||
Luminous Flux | 4800Lm | 8000Lm | 12800Lm |
Light Source Service Life | 50000 hours | ||
Working Time | 24 hours | ||
Lighting Mode | Time Control | Time Control | Time Control |
Control Mode | light-operated switch,intelligent power module | ||
Guarantee Period | 5 years |
III. Q&A
1. What are LEDs
LEDs are light emitting diodes. These are electronic components that convert electrical energy directly to light through the movement of electrons within the material of the diode. LEDs are important because due to their efficiency and low energy, they are beginning to replace most conventional light sources.
2.why is LED technology classified as solid state lighting?
The term solid state lighting is used because the electronics produce light directly from solid materials in which the electrons are embedded. This is unlike other technologies, for example fluorescent technology, which requires a gaseous discharge medium to initiate production of light.
3.what does “future-proofing “of LED products mean?
LED technology is constantly changing. Rapid innovation continues to improve the performance of LED on an almost daily basis. Future-proofing of LED modules allows luminaire manufacturers to switch from one generation to the next improved generation without major retooling or changes in luminaire design, offering backward compatibility with drivers.
4.why are the economic advantages of using LEDs over conventional light sources?
Although the initial cost of conventional light sources is less than LEDs, the operational and maintenance costs of LED are significantly lower. LEDs, having a longer life, reduce maintenance and lamp replacement cost. . Because LEDs need to be replaced less frequently, the owner spends less on new lamps and the labor needed to change them. LEDs also consume less energy; thus the overall cost of a LED system can be significantly lower than that of conventional lighting systems. Most applications with LEDs offer a payback period as low as three to four years.
Contact Person: Zhang Chen
Tel: 0086-13810865644